Place your order

Fill in the order form and provide all details of your assignment.

Proceed with the payment

Choose the payment system that suits you most.

Receive the final file

Once your paper is ready, we will email it to you.

PROD 1024 Advanced Principles in Lean Manufacturing Coursework Individually read

by | Nov 19, 2021 | Marketing homework help | 0 comments

GET HELP WITH YOUR ESSAY

If you need assistance with writing your essay, our professional Essay Writing Service is here to help!

DISCOUNT CODE FIRST25

ORDER THIS OR A SIMILAR PAPER NOW

PROD 1024 Advanced Principles in Lean Manufacturing
Coursework
Individually read the Farm Equipment International data set and:
1. Produce a door-to-door value stream map of the current manufacturing
process.
[25 marks]
2. Outline and answer the eight key questions for the future state design. [40 marks]
3. Thereby produce a future state map detailing the processes necessary to operate the factory according to lean manufacturing principles.
[25 marks]
4. Produce an implementation plan for the company to move from present state to future state.
[10 marks]
Notes:
Remember – this is an individual piece of coursework. If you collaborate, you risk losing all your marks!
This coursework is intended to measure the following learning outcomes:
reflect on the significance of lean theory and the application of key lean thinking principles;
critically analyse lean thinking in different engineering sectors;
formulate innovative proposals based on detailed knowledge of the tools and techniques relating to the implementation of lean thinking;
Farm Equipment International
Farm Equipment International (FEI) produces components and sub-assemblies for agriculture. Here, we are considering one product family, hydraulic control sections. These are produced in several configurations for different tractors and markets. The market for hydraulic control sections covers both original-equipment tractor assemblers and the aftermarket repair and overhaul businesses that support the agricultural industry worldwide.
As the company offers a wide variety of possible configurations, and the fact that the exact configuration each customer requires can vary from order to order, hydraulic control sections are made to order. A hydraulic control lever currently takes 27 days to go through the factory. This production lead time and a large order backlog have resulted in FEI to quote a 60 day lead time to customers. Unfortunately, FEI’s original-equipment customers can not predict their exact requirements more than 2 weeks before use. As a result they make frequent changes to the detail of their orders 2 weeks before delivery. These changes lead to frequent expediting of batches at the FEI factory.
Production Control at FEI releases customer orders to the factory approximately in the sequence that they are received, the shop floor supervisors and operators “batch” the orders together by configuration in an attempt to reduce the number of changeovers. This also leads to expediting of orders.
The product
 A hydraulic control section is a metal tube with a cast connector welded to each end.
 Hydraulic control sections are available in 30 different lengths, 3 diameters, and with 2 different types of connectors. Each end of a hydraulic control section can have a different connector. This means that FEI can potentially supply 360 different finished hydraulic control sections. It is not known what the demand for each individual specification is.
Customer requirements
 24000 hydraulic control sections per month.
 Order size varies from 20 pieces up to 200 pieces. Average order size is 50
pieces.
 5 hydraulic control sections per box.
 Several shipments each day by truck to different customers.
 Each order from each customer varies in quantity and configuration.
 FEI requires orders to arrive 60 days before shipping of finished hydraulic
control sections.
 Customers may change the mix of configurations up to 2 weeks before the
shipping date.
Production Processes
All the hydraulic control sections follow the same basic factory routing:
Cut tube Weld Weld Remove Paint Assembly 1st end 2nd end flash (contractor)
Machine Castings
 FEI’s routing for producing hydraulic control sections is to cut a metal tube to length, weld the connectors in place, deflash (remove the excess weld material), painting (done at an external contractor’s premises), and finally assembly of the connectors. The cast connectors are also machined at FEI’s factory. Finished hydraulic control sections are shipped to customers daily.
 Switching between tube lengths requires a 15 minute changeover at the cutting, welding and deflash workstations.
 Switching between tube diameters takes a 60 minute changeover at the cutting, welding and deflash operations. This longer changeover is mostly due to a “1st off” quality control inspection after such a changeover.
 Switching between each of the three types of cast connectors takes a 2 hour changeover at the machining operation.
 Tubes are supplied by Kentish Tube Systems Ltd. The lead time for obtaining tubes is 4 months (16 weeks). Kentish Tube Systems Ltd. deliver products every 2 weeks.
 Raw castings for the end connectors are supplied by Essex Castings Ltd. The lead time for obtaining castings is 3 months (12 weeks). Essex Castings Ltd. deliver products every 2 weeks.
Work Time
 20 days in a month.
 2 shifts per day in each department.
 8 hours per shift, overtime added if necessary.
 Two breaks each shift, 15 minutes per break.
o Manual processes stop for breaks o Lunch is not paid.
FEI Production Control
 Receives customer orders 60 days from shipment, and enter them to MRP system.
 Generates a “shop order” per customer order. This follows the product through the entire production process.
 Release shop orders to the factory 6 weeks before the shipment date to accelerate MRP’s ordering of tubes and castings.
 Issue a daily production list to supervisors in production departments. Supervisors schedule shop orders through their department.
 Receives customer configuration changes 2 weeks before shipment and advises department supervisors to expedite orders as necessary.
 Issues daily shipping schedule to Despatch Department.
Process Information
1. Cutting (the saw cuts tubes and rods for many FEI product families).  Manual process, 1 operator
 Cycle time = 15 seconds
 Changeover time = 15 minutes (length), 60 minutes (diameter)  Reliability = 100%
 Inventory
i. 20 days of uncut tubes
ii. 5 days of cut tubes.
2. Welding workstation 1 (dedicated to the hydraulic control sections product family)
 Welds the first machined casting to the tube
 Automatic process, with operator load and unload external to the
machine cycle
 Cycle time:
i. Operator = 10 seconds
ii. Machine = 30 seconds
 Changeover time = 15 minutes (length), 60 minutes (diameter)
 Reliability = 90%
 Inventory = 3 days of welded sections.
3. Welding workstation 2 (dedicated to the hydraulic control sections product family)
 welds the second machined casting to the tube
 Automatic process, with operator load and unload external to the
machine cycle
 Cycle time:
i. Operator = 10 seconds
ii. Machine = 30 seconds
 Changeover time = 15 minutes (length), 60 minutes (diameter)
 Reliability = 80%
 Inventory = 3 days of welded sections.
4. Deflash workstation (dedicated to the hydraulic control sections product family)
 Automatic process, with operator load and unload external to the machine cycle
 Cycle time:
i. Operator = 10 seconds
ii. Machine = 30 seconds
 Changeover time = 15 minutes (length), 60 minutes (diameter)
 Reliability = 100%
 Inventory = 5 days of deflashed sections.
5. Painting (hydraulic control sections are shipped to an outside contractor for painting)
 Painting lead time = 2 days
 One daily truck pickup of unpainted sections and drop-off of painted
sections
 Observed inventory:
i. 2 days at the painter
ii. 6 days of painted sections at FEI.
6. Connector assembly (dedicated to the hydraulic control sections product family)
 Manual process with 6 operators
 Total Work Time per Piece = 195 seconds
 Changeover time = 10 minutes fixture swap
 Reliability = 100%
 Observed finished goods inventory in warehouse = 4 days of finished
hydraulic control sections.
7. Machining of Castings (dedicated to the hydraulic control sections product family)
 Automatic machining process with one machine attendant  Cycle time = 30 seconds
 Changeover time = 2 hours
 Reliability = 100%
 Observed inventory:
i. 20 days of raw castings from the supplier
ii. 4 days of machined castings.
8. Despatch department
 Removes parts from finished goods warehouse and stages them for truck shipment to customers.

GET HELP WITH YOUR ESSAY

If you need assistance with writing your essay, our professional Essay Writing Service is here to help!

DISCOUNT CODE FIRST25

ORDER THIS OR A SIMILAR PAPER NOW

Fast Delivery

We know your paper is URGENT! Whatever your deadline is, we’ll always submit your paper on time. Always!

24-7 Support

Have a request at 2am? Our support team is available to you on a 24/7 basis through email, messaging or live chat.

Unlimited Revision

Do you need any edits done to your paper? All our assignments come with a free unlimited revisions tag!

Total Privacy

We take your privacy very seriously. You can rest assured that your identity will forever remain private.

100% Original

All our papers are written from scratch. Which guarantees that every paper you receive has 0% plagiarism.

Affordable Prices

We plagiarism-free high-quality papers from as low as $12. Additionally, we offer lifetime personal discounts.

How It Works

b

Tell us about your homework assignment.

~

Securely pay for your academic paper

j

Paper gets assigned to an expert tutor

Receive the complete paper via email

“Thanks guys! You have great writer who helped me in my last assignment! I got excellent grade in my last assignment and i will recommend you!”

Benjamin

“Being associated with experts minds for 1 year, i am extremely happy and fully satisfied with your high class assistance and quality writing services! Cheers!”

Jane 

I had casually placed an order on Lesson-edu.info for a short essay and wanted to see if their claim of timely delivery of tasks was true or not. The assignment was not delivered on time, but the quality of the essay was also remarkable.

Alice

Team up With Your Own Writing Expert Now

Stuck with overwhelming assignments? We will take care of all your writing tasks.

%d bloggers like this: